16W LED T8 TUBE 4FT

ETL Qualified MAGICFIT Plug and Play 4FT 16W LED Tube

Basic Feature

- Signlite opto MAGICFIT Type B Plug and Play T8 direct replacement LED tubes are an energy saving product as special replacement for 4ft traditional flourescent T8 lamps. 
- Aluminum+Plastic housing.
- Designed to operate on existing ballast with input voltage of AC120-277V, AC347V.
- This magic tubes minimize labor and recycling costs.
- THD less than 20%, Power factor more than 0.95.
- Reduces energy consumption up to 50%.
- Stable lumens output for different ballast brand with different ballast factor.
- No UV emission.
- This tube only work with specifical electronics ballast and can not work with any magnetic ballast.

DETAILED DESCRIPTION

Detailed Data

- Model Name: TCA096N16 Plug and Play Led Tube 
- Wattage: 16W 
- Life Span: 50,000 Hours 
- Weight: 300g 
- Led Chip: 96 pieces of SMT 2835 
- Power Factor: More than 0.95
- Efficiency: l00 lm/W 
- Certificates: ETL,CETL, RoHS

Installation Instruction

- Check the ballast installed in the field and make sure the ballast is in manufacturer's ballast list. 
- Loose and damaged lamp holder and socket need to be adjusted or be replaced.

"Plug" and "Play" procedure

- Turn off the power to the light fixture at the breaker panel before installation.
- Open the diffuser from the light fixture.Ensure pins are firmly seated in lampholders.
- Remove the flourescent tubes, Please dispose of these items properly as they contain mercury.

- Put led tube into the lighting fixture.

- Install the Led tube,close the diffuser.
- Turn on the power.

Caution

- Use only with specific electronic ballast.
- Risk of fire.Loose or damaged end cap and lampholder need to be replaced before installation.
- Risk of electric shock. Make installation with gloves.
- Use only in place of fluorescent lamps specified on label.
- This lamp is intended for use with emergency exists.
- These lamps are to be used in indoor damp location only.Do not suitable for wet location.
- These lamps works with a light dimmer.
- If the lamp or luminaire exhibits undesirable operation (Buzzing, Flickering, etc), immediately turn off power,remove lamp from
luminaire and contact manufacturer.
- This lamp only operates on electronic ballasts.If lamp does not light when the luminaire is energized,remove this lamp from luminaire and contact manufacturer.
- Do not make mass installation before sample testing.

SIGNLITE LED T8 TUBE ETL Certificate.pdf

SIGNLITE LED T8 TUBE FCC Certificate.pdf